Tuner Pin Drilling Template – 10 mm Holes, 2-Pin Tuners (6 in Line)

Drill all 12 locating-pin holes for 2-pin tuners in one go – perfectly aligned, no measuring, no marking.

This drilling template is made for 6-in-line headstocks with 10 mm tuner post holes and tuners that use two locating pins on the back (e.g. modern locking tuners). Six pegs on the underside drop straight into the post holes, so the template sits exactly in place on the back of the headstock. Then just drill through the guide holes – every tuner ends up straight and evenly spaced.

• For 10 mm tuner post holes
• For tuners with 2 anti-rotation pins
• 6-in-line layout (Strat-style headstocks)
• Self-locating pegs – no clamping or measuring needed
• Reusable workshop tool

Tip: use a depth stop or a piece of tape on your drill bit so you don't drill too deep.